
15
Burners
The burner caps and crowns can be
removed for cleaning.
Wash the burners caps and crowns using
hot soapy water, and remove marks with a
mild paste cleaner. A well-moistened soap
impregnated steel wool pad can be used
with caution, if the marks are particularly
difficult to remove.
After cleaning, be sure to wipe dry with a
soft cloth.
Burner
cap
Burner
ring
IIgnition
SOMETHING NOT WORKING
If the appliance is not working correctly,
please carry out the following checks, before
contacting your local Service Force Service
Centre.
IMPORTANT: If you call out an engineer
to a fault listed below, or to repair a fault
caused by incorrect use or installation, a
charge will be made even if the appliance
is under guarantee.
Symptoms
Solutions
1. No burner ignition
2. The gas ring burns unevenly
3. One of the oven or grill burners does not
ignite
Check that:
• Gas supply is completely open
• The position of gas pipe is correct
• The burner is not wet
• The burner cap and ring burner have been
replaced correctly after cleaning
Check that:
• The main jet is not blocked and the ring burner is
clean of food particles
• The burner cap and ring burner have been
replaced correctly after cleaning
Check that:
• The burner is in its correct place
• The burner is not wet
• The control knob has been pressed for 10
seconds upon ignition
Kommentare zu diesen Handbüchern