Tricity Bendix SG205/1WL Bedienungsanleitung PDF herunterladen (Seite 25)

25

Flame adjustment

Oven burner

The burner is correctly adjusted when the

flame is stable, silent and goes out without

any noise.

• When the flames are too short, the nozzle

is whistling or the flames have the

tendency to detach from the burner, it

means that there is too much air in the

valve. If there is too much air there is a

risk that the flames will extinguish.

• But, if the flames are too long, soft,

lighting, there is not enough air in the

valves. These flames discolor the bottom

of pans.

• Loosen the fixing screw M.

• Move the air adjuster A forward or

backward until achieving the right mixture

(see table no. 2);

• Tighten the fixing screw M.

Grill burner

• Loosen the screw fixing the Venturi.

• Move the adjusting collar left or right until

achieving the correct flame picture (see

table no. 2).

Tighten the fixing screw.

Adjustment of minimum level

Oven burner

• Remove the top pan support as well as

the burner caps and the burner crowns.

• Unscrew and remove the 2 top plate-

fixing screws and remove the top plate.

• Light the burner knob in the maximum

position and leave the oven door closed

for about 10 min.

• Turn the knob slowly to the minimum

position.

• Pull off the knob to adjust minimum flow.

Table no.2

Air adjusting (mm)

Gas type

Oven Grill

G20 3,2 25

G30 3,2 24

G31 3,2 24

M

A

air adjusting

adjusting collar screw

opening

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare